For Craigkelly we recommend the DM log for strong signal areas, the Log36 for medium signal areas, and the Yagi18K or XB10K for poor signal areas, the latter aerial being particularly well suited to loft mounting. The XB16K is for those with the most marginal signals. The dimensions and test performance of the aerials can be found on the relevant tables.
Craigkelly television transmitter (Pre DSO). (Pictures MB21)
The close up on the right shows (from the top) the digital transmitting arrays for CH39 and CH42 MUXES, the analogue transmitting arrays and the other digital MUXES (under the glass fibre shroud), the FM radio transmitting arrays (note the mixed polarity) and at the bottom, well to be honest I`m not sure what they were !
If you really need a “high gain” aerial for Craigkelly you should try and use a K group. Note how MUX 6 may be receivable on some A group aerials. Fortunately the 3 main PSB MUXES will be still receivable on an original A group antenna.
Also see other relevant K group curves.
Because of wideband antennas poor response at the bottom of the band, anyone who really requires a “high gain” aerial on a K group transmitter, e.g. Craigkelly, should actually fit a K group ! See Craigkelly`s Graph
(Not that many people actually need a high gain aerial anyway........)
For Craigkelly`s frequencies see its channel allocation guide. This table also includes
the same information for some of the other transmitters receivable in the area, namely
Angus, Black Hill, Darvel, Penicuik, Selkirk and Chatton. This data can be of great
use in determining possible causes of co-
The transmitter over looks the town of Burntisland which has rather an interesting history form the railways point of view. From 1847/1848 the town was the Southern terminus of the Edinburgh & Northern Railway which extended up to Perth and Tay Port. But this was despite being separated from its namesake by 6 miles of water in the shape of the Firth of Forth ! The trains could travel straight onto the pier for transhipment onto ferries to complete the journey to the Scottish Capital. This anomaly came to an end with the opening of the fabulous Forth bridge in 1890, although by then the Edinburgh & Northern had been absorbed by the North British Railway. Incidentally the aforementioned Forth Bridge was jointly owned by no fewer than four railway companies, namely the North British, the North Eastern, the Great Northern and the Midland !
Craigkelly transmitter was built in 1971, or rather more accurately it was rebuilt on its present site. The tower was originally in use at Emley Moor in 1956 by the IBA, as the first of the three transmitters to have been in existence there. The tower is situated about 8 miles North of Edinburgh, overlooking the Firth of Forth and the most famous bridge in the world. Its population coverage is about 1 million and it uses nine small repeater transmitters to improve its coverage in fringe areas.
The site altitude is 182m and the structure height is 125m with the transmitting arrays possibly another 10m or so above that, see How High Is High ?
Being a "main transmitter" it is horizontally polarised. Craigkelly was originally an A group but the advent of digital means it`s now a K group (or wideband) because MUXES 4 to 6 are now out of group. That said, if you live in a strong signal area you may well pick them up OK (especially MUX 6).
The transmission power for MUXES 1 to 3 is 20kW, and for MUXES 4 to 6 it`s 10kW (before the June 2011 switchover it was only 4kW and 2kW respectively).
There is one ”Local” channel allocated to Craigkelly, CH52, which is used mainly for a local Edinburgh TV station. In addition, there are two lower power HD MUXES on CH33 and CH34 (both at 11kW). All of these extra channels can be picked up by decent K group aerials (or widebands).
Craigkelly Transmitter OS Grid Ref NT 233 872
Also see basic digital fault finding.
700MHz clearance is due at Craigkelly in Q4 2018 when it will revert to its original A group (excl M7 & M8), most K group or wideband aerials will continue to work OK though. Even more positively, those in poor signal areas will find swapping to an A group aerial will pay dividends.
We are more than willing to give advice to those actually purchasing from us. Could those only seeking information please just find the answer somewhere on this site, or ring an aerial installer local to them, or call the reception advice phone numbers.
If you`ve found this site informative and, hopefully, interesting as well,
The dotted lines are MUXES 7 & 8
(Both together only have a small audience and they`e due to be switched of by about 2020)
Craigkelly transmitter`s channel guide.
The frequencies given are for (most) digital MUXES, for analogue channels deduct 3MHz.